Sèvi ak nòt pou yon sèl Groove ultrasons netwayaj machin

To prolong the service life, it is recommended to put the device in a ventilated and dry area, and the fan hole at the rear of the generator should be cleaned regularly. The generator has air vents on all sides to make the air flow unimpeded.  

1. The cleaning tank must be put into liquid before it can start working. The water level is > 100mm (bottom vibration type) and placed horizontally. 

2. When cleaning the cylinder at normal temperature, do not directly inject high temperature liquid into the cylinder, so as not to cause the loosening of the transducer and affect the normal use of the machine. 

3. When the cleaning liquid needs to be replaced due to pollution, do not inject low-temperature liquid directly into the high-temperature cylinder, which can also lead to the transducer falling off. At the same time, the heater switch should be turned off, so as not to damage the heater because there is no liquid in the tank. 

4. tcheke transducer a regilyèman, pa fè li mouye ak enpak, se konsa yo pa lakòz pèt nesesè. Fèmen ekipman pou pouvwa prensipal la apre w fin itilize. Pa rekòmanse imedyatman apre fèmen an, tan an ta dwe plis pase 1 minit.